Shoe Goo II Low Odor Clear Adhesive
We designed Shoe Goo II for customers who need professional-grade shoe repair without the strong solvent smell. This clear adhesive bonds, repairs, and protects athletic shoes, work boots, skate shoes, and casual footwear with a crystal-clear finish that flexes with every step.
Our low-odor formula delivers the same industrial-strength adhesion you expect from Shoe Goo while making indoor repairs more comfortable. Whether you’re fixing separated soles, rebuilding worn toe caps, or sealing canvas tears, Shoe Goo II creates waterproof, abrasion-resistant bonds that extend the life of your favorite footwear. The clear formula dries invisible on most materials and remains flexible after curing, so your repairs move naturally with your foot.
What Makes Shoe Goo II Different
Formula & Application
Shoe Goo II uses an advanced urethane adhesive system that reduces volatile organic compound emissions by up to 60% compared to our original Shoe Goo formula. The lower odor profile makes this version ideal for apartment dwellers, dorm rooms, or anyone who prefers to work on repairs indoors without ventilation concerns.
Apply Shoe Goo II directly from the tube to clean, dry surfaces. We recommend roughing smooth areas with sandpaper first to improve adhesion. Spread the adhesive in a thin, even layer and allow it to set for 24 hours before wearing the repaired shoe. For deep fills or rebuilding worn areas, apply multiple thin coats rather than one thick application — this ensures proper curing and maximum flexibility.
Best Uses & Compatibility
Athletic & Skate Shoes
Shoe Goo II excels at rebuilding ollie holes in skate shoes and repairing delaminated basketball or running shoe soles. The clear formula disappears on white mesh, canvas, and translucent rubber, making it our top choice for visible repairs on light-colored footwear.
Work Boots & Outdoor Footwear
Use Shoe Goo II to reseal separated welt stitching, fill cracks in leather work boots, or reinforce high-wear zones on hiking boots. The waterproof bond protects against rain, mud, and stream crossings. We’ve tested this formula on steel-toe boots, logger boots, and tactical footwear with excellent results on both leather and synthetic materials.
Care & Storage Instructions
Store Shoe Goo II upright in a cool, dry location away from direct sunlight. Replace the cap immediately after each use to prevent the adhesive from drying in the tube. If the tip clogs, clear it with a pin or wire before the next application.
Cured Shoe Goo II bonds are permanent and flexible, requiring no special maintenance. Clean repaired areas with mild soap and water — avoid harsh solvents or acetone, which can soften the adhesive. Repairs typically last 6-18 months depending on wear intensity, and you can reapply Shoe Goo II over existing repairs to extend protection further.
Complete Your Shoe Care Kit
Rated 4.8 by verified buyers
Common Questions About Shoe Goo II
Shoe Goo II features a significantly reduced odor profile while maintaining the same bonding strength and flexibility as our original formula. We reformulated the urethane adhesive system to lower volatile organic compound emissions by approximately 60%, making indoor application more comfortable. The adhesive performance, cure time, and durability remain identical to the original product.
Both formulas create waterproof, abrasion-resistant bonds that flex with footwear. Choose Shoe Goo II when working indoors or in spaces with limited ventilation, or when you prefer a less noticeable solvent smell during application and curing.
Yes, Shoe Goo II bonds to rubber, leather, canvas, vinyl, synthetic fabrics, and most plastics commonly used in footwear construction. We’ve tested it successfully on athletic shoes, work boots, dress shoes, sandals, and outdoor footwear.
For best results on smooth materials like treated leather or plastic, lightly sand the surface before applying adhesive. This creates better mechanical grip for the bond. The clear formula works especially well on light-colored materials where you want invisible repairs.
Shoe Goo II requires 24 hours to reach full cure and maximum bond strength. The adhesive will feel dry to the touch after 2-4 hours, but the internal curing process continues for a full day.
We strongly recommend waiting the complete 24-hour period before wearing repaired footwear. Early stress on the bond can compromise adhesion and flexibility. For thick applications or deep fills, allow an additional 12 hours to ensure the adhesive has cured throughout.
While Shoe Goo II has significantly lower odor than our original formula, we still recommend working in a well-ventilated area when possible. The reduced volatile organic compound emissions make it much more comfortable for indoor use in apartments, dorms, or workshops without dedicated ventilation systems.
If you’re sensitive to chemical odors or working in a very small enclosed space, open a window or use a fan to circulate air. The odor dissipates quickly during application and fades to nearly undetectable levels within 30-60 minutes.
Yes, you can apply Shoe Goo II directly over existing cured Shoe Goo repairs to extend protection or build up worn areas. Clean the existing repair surface with rubbing alcohol and allow it to dry completely before applying the new layer.
The urethane adhesive in Shoe Goo II bonds well to cured Shoe Goo, creating a unified repair. This makes it easy to maintain long-lasting footwear repairs by adding fresh adhesive as needed rather than removing and restarting the entire repair.
One 3.7 oz tube of Shoe Goo II typically covers 30-50 square inches when applied in a proper thin layer. This is enough to repair 4-6 pairs of athletic shoes with standard wear damage like toe caps or sole edges, or 2-3 pairs of work boots requiring more extensive rebuilding.
Coverage varies based on repair depth and technique. Multiple thin coats provide better adhesion and flexibility than single thick applications, though thin layers use adhesive more efficiently and cure more completely.
Shoe Goo II maintains its crystal-clear appearance over months of normal use and does not yellow from UV exposure or age. We formulated this adhesive specifically to remain transparent on light-colored materials and clear plastics.
The cured adhesive may accumulate dirt or surface contamination in high-contact areas like soles, but the adhesive itself stays clear. Clean repairs with mild soap and water to restore clarity. The adhesive will not yellow or discolor from heat, moisture, or sun exposure during typical footwear use.